SBIR-STTR Award

Low Phase Noise Signal Generation
Award last edited on: 1/23/2007

Sponsored Program
SBIR
Awarding Agency
DOD : MDA
Total Award Amount
$1,069,582
Award Phase
2
Solicitation Topic Code
MDA03-015
Principal Investigator
David A Symonds

Company Information

Piezo Technology Inc

2525 Shader Road
Orlando, FL 32804
   (407) 298-2000
   sales@piezotech.com
   www.piezotech.com
Location: Single
Congr. District: 10
County: Orange

Phase I

Contract Number: ----------
Start Date: ----    Completed: ----
Phase I year
2003
Phase I Amount
$69,815
At the present state of the art it is not feasible to generate a signal directly at the microwave operating frequency having the required short-term or long-term stability The best is a high-performance crystal oscillator, usually realized as an ovenized crystal oscillator (OCXO). The OCXO forms the master oscillator for the system; from it, all required system frequencies are derived coherently by a combination of frequency multipliers, phase-locked oscillators, mixers, filters, and frequency synthesizers. If these components and subsystems are properly designed, both the short-term and long-term stability limitation is due to the master crystal oscillator. This proposal deals with methods for improving the master crystal oscillator. Two types of phase noise must be distinguished from one another: quiescent phase noise, arising from the various components of the system when stationary, and vibration-induced phase noise In a well-designed oscillator, the acceleration sensitivity is almost entirely due to the resonator(s). This proposal deals with improvements to the master crystal oscillator. Crystal oscillator phase noise can be improved by 1) resonator improvements, 2) use of multiple resonators, or 3) use of multiple oscillators. In addition, 4) oscillator phase noise might be reduced by phase noise negative feedback. Anticipated Benefits/Commercial Applications: The products resulting from this topic will make available low noise reference oscillators for use in radar exciters and other systems that require a frequency source with low phase noise under both static and vibratory environments.

Keywords:
Phase Noise, crystal oscillator, Frequency Source, microwave source, vibration insensitive, AM noise, PM noise, side-band noise

Phase II

Contract Number: ----------
Start Date: ----    Completed: ----
Phase II year
2005
Phase II Amount
$999,767
At the present state of the art it is not feasible to generate a signal directly at the microwave operating frequency having the required short-term or long-term stability The best is a high-performance crystal oscillator, usually realized as an ovenized crystal oscillator (OCXO). The OCXO forms the master oscillator for the system; from it, all required system frequencies are derived coherently by a combination of frequency multipliers, phase-locked oscillators, mixers, filters, and frequency synthesizers. If these components and subsystems are properly designed, both the short-term and long-term stability limitation is due to the master crystal oscillator. This proposal deals with methods for improving the master crystal oscillator. Two types of phase noise must be distinguished from one another: quiescent phase noise, arising from the various components of the system when stationary, and vibration-induced phase noise In a well-designed oscillator, the acceleration sensitivity is almost entirely due to the resonator(s). This proposal deals with improvements to the master crystal oscillator. Crystal oscillator phase noise can be improved by 1) resonator improvements, 2) use of multiple resonators, 3) use of multiple oscillators, or 4) Vibration filtering or cancelleation.

Keywords:
LOW-PHASE-NOISE, PHASE, NOISE, CRYSTAL, RESONATOR, FREQUENCY, SOURCE, ACCELERATION, VIBRATION